Warning: Cannot modify header information - headers already sent by (output started at /home/56/74/2017456/web/rvhouse/config.php:1) in /home/56/74/2017456/web/rvhouse/index.php on line 8
RV House WWW

English
French
Italian

Router/Firewall Help

If you have a router and/or firewall you must configure them so that you can use RV House and play Re-Volt online.

To make things as clear and easy as possible the recommendations are here divided to instructions for routers and separate instructions for firewalls. If you have both a router and a firewall, apply both instructions.

Router

If you have a router you must forward some ports to your own computer. From your router configuration try finding something named similarly to "Port Forwarding". Then configure there it to forward the ports according to the following table:

Router Port Forwarding table:
Protocol Source Ports Target Ports From IP To IP

TCP 2301,47624 2301,47624 ALL Your IP

UDP 2300-2400 2300-2400 ALL Your IP

Also see Port Forward web-site's "Forwarding" section if you have trouble finding the right settings for your router. You can for example select eDonkey application and by similar procedure apply the settings outlined above to your router.

Firewall

The easiest thing to do is to set firewall to allow making all connections for Re-Volt and RV House. If that is not possible for some reason, here is how you should setup the ports:

Firewall settings:
Protocol Ports Source/Target Direction

UDP/TCP ALL Target out

UDP 2300-2400 Source/Target in/out

TCP 47624 Source/Target in/out

Still having problems?

See from the New Player Help section the document that talks about connections.

If all else fails, post about your problem to the RV Pub Forum. There's always someone who has battled with the same problems before and can help.

RV House v0.93.7
RV House last update:
November 01 2015 15:13:04. GMT Time

RV Track Manager +
RV House v0.93.7 installer

WolfR4
Extends Re-Volt